Brand New!
MLK-180.3A - Hertz 7" Mille Legend 3-Way Active Kit: ML1800.3 + ML700.3 + ML-280.3
Features & Specifications: ML1800.3
ML 1800.3 Legend car audio woofers has been thought and designed for the enthusiasts attending contests who need a component merging the timbre accuracy of ML 1650.3 Legend to a wider extension to the low frequencies thanks to the large emission surface, higher power handling and control which only a 50 mm voice coil can ensure. To get to these results, the R&D staff performed extensive in-car voicing sessions, after building several prototypes with the FEA simulation method and testing them with a wide array of measurements carried out with the Klippel® suite. Like in the suspensions of competition cars, the surround must stand the most extreme working conditions to ensure maximum stability and symmetry at high excursions, and so to achieve impact and extension to the low frequency range. For this reason, the electro-acoustic designers developed a new surround-basket gluing system called “Boundary Free Surround”. This technology, provides the ability to achieve wider emission surface of the cone compared to speakers with same diameter; that way, the cone manages to move a bigger mass of air, so it produces more acoustic pressure.
Features
- Size mm (in.): 180 (7)
- Power Handling:
- 400 Watts Max
- 200 Watts RMS
- Impedance: 4-Ohm
- Frequency response: 38-6kHz
- Sensitivity: 93dB/SPL
- Voice coil Ø mm (in.): 50 (2)
- Magnet: Neodymium
- Cone/Dome: Pressed-pulp cone with cotton fibres
Specifications:Mounting Hole Diameterin6.3Mounting Depthin3Nominal Impedance (Znom)Ω4DC Resistance (Re)Ω3.2Voice Coil Inductance (Le)mH0.35Resonance Frequency (Fs)Hz60Mechanical Q Factor (Qms) 7.22Electrical Q Factor (Qes) 0.53Total Q Factor (Qts) 0.5Moving Mass (incl. Air Load) (Mms) g27.5Suspension Compliance (Cms)mm/N 0.3Effective Cone Diameter (D)in5.87Equivalent Volume (Vas)l12.2Force Factor (BL)T•m7.8Frequency ResponseHz38 - 6000Voice Coil Diameterin1.97Power Handling PeakW400Net Weight per componentlbs3.77
ML700.3he MLK 700.3 Legend car audio speakers system aims at offering a mid-high frequency range of excellence, to combine with a Legend woofer with a choice between ML 1650.3 and ML 1800.3 actively filtered in a multi-amplified configuration. MLK 700.3 Legend is composed of the ML 700.3 Legend Extended Midrange, the ML 280.3 Legend tweeter and the MLCX 2 TM.3 dedicated crossover that features the unique Mid-Countour control with its three-position selector, acting on the mid frequencies of the ML 700.3 Legend midrange by varying the cross-point with the tweeter to obtain the desired sound. The V-cone® exponential profile without the traditional dustcap gets close to the perfect one, generating exceptional dispersion: thanks to the synergistic action of these technological elements, ML700.3 Legend boasts outstanding high frequency extension making it possible to build purist two-way systems in combination with ML 1650.3 Legend or ML 1800.3 Legend. Thanks to this configuration, where there is only one cross-point, phase rotations are limited to the minimum, ensuring excellent soundstage and disarming timbre consistency. With the mid-high frequencies being handled by the ML700.3 Legend and the low ones by the ML1800.3 Legend, the whole audio range is reproduced with transducers built with the same materials and based on the same electro-acoustic structure; that doesn’t happen with woofer and tweeter, since due to its own nature the tweeter is different in materials and structure. The uniformity in materials and structures creates very high timbre consistency, so the speakers can “disappear” and leave room to emotions.
Specifications:
- Power Handling:
- 200W Max
- 100W RMS
- Impedance: 4-Ohm
- Sensitivity: Midrange 90 dB/SPL
- Voice coil Ø mm (in.>: Midrange 20 (0.8)
- Woofer size mm (in.) 70 (3)
- Woofer magnet: Neodymium
- Woofer cone: Pressed-pulp cone with cotton fibres
ML-280.3
To improve the car audio tweeters which was considered a reference since its first introduction into the market is a quite challenging task which could only be performed by a continued evolution in time and maximum care for each detail that might affect sound.
From these presuppositions the Hertz ML 280.3 Legend car audio speakers has been born. Through the FEA simulations, the electro-acoustic designers carried out an extensive research which led to the optimization of the Tetolon dome geometry, to minimize distortion.
This optimization method led to a reviewed face plate geometry for improved frequency response and lower distortion.
Another element of the tweeter especially important for sound is the rear acoustic chamber: the designers performed an exhaustive research on the geometry as well as on the employed damping material, achieving 50% increase in overall volume, to extend response to lower frequencies with 900Hz resonance frequency.
Features
- 1.38” Neodymium Magnet Tweeters
- Power Handling:
- 180W Peak (Hi-Pass filtered @ 1,8kHz - 12dB Oct.)
- Impedance: 4-Ohms
- Frequency response: 1k - 28kHz
- Sensitivity: 92dB SPL
- Voice coil Ø : 1.1”
- Cone/Dome: Tetolon
Specifications
- Mounting Hole Diameterin1.89Mounting Depthin1.3Nominal Impedance (Znom)Ω4DC Resistance (Re)Ω3.3Voice Coil Inductance (Le)mH0.013Resonance Frequency (Fs)Hz900Mechanical Q Factor (Qms)
4Electrical Q Factor (Qes)
1.9Total Q Factor (Qts)
1.3Moving Mass (incl. Air Load) (Mms) g0.4Suspension Compliance (Cms)mm/N 0.09Effective Cone Diameter (D)in1.11Force Factor (BL)T•m1.9Frequency ResponseHz1000 - 28000Voice Coil Diameterin1.11Power Handling PeakW180Net Weight per componentlbs0.22
International Shipping Info:
Free shipping DOES NOT APPLY to Puerto Rico, Hawaii, Guam, Alaska or any country outside of the United States.Please message us for shipping quotes. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up ? do not confuse them for additional shipping charges.
Warranty:
Each and every product for sale on eBay.com by WoofersETC is covered under a (1) One Year Warranty, and can be returned for a period of (1) one year for warranty service. If you have purchased a product from us within the last one (1) year, and it is failing to perform as intended by its manufacturer, please email customer service. You will be issued a Return Authorization Number. Returns will not be accepted without a previously issued RA#.
In order to maintain an inventory of 100%, Brand New, A-Stock, untouched products, all sales are final. We ask that you please be sure you are ordering the correct product.
Protect Your Product With a Consumer Priority Service Warranty